Navigation
Description

Product Description

The ATW-R3210 receiver features automatic frequency scanning that eliminates the need for searching for clear channels by automatically selecting the most appropriate frequency for the area in which the wireless is operating. 25 kHz frequency spacing enables the system to easily find an open frequency in crowded RF environments, while pre-coordinated frequency scan groups simplify selection of usable frequencies in a multichannel wireless system. Once selected, frequencies can be synced with transmitters using the system’s IR sync functionality. The system’s squelch setting can be configured to automatically adjust to maximize range while minimizing potential interference. Advanced digital Tone Lock™ squelch provides enhanced rejection of interference. In addition, the Tone Lock signal from the transmitter also conveys information on the transmitter’s battery condition and mute status back to the receiver for display. The receiver’s dual-mode front panel display can switch between the standard view, which provides continuous indication of RF signal strength, frequency, mute status, audio modulation level of the received signal, and transmitter information, and a performance view, which highlights key metering. Settings can be easily adjusted using the control dial and BACK button located on the receiver’s front panel. Settings can also be locked to prevent them from being changed.

Operating on 12V DC, the receiver incorporates rear-panel connections for balanced XLR and unbalanced ¼” outputs, along with detachable BNC ¼” wave antennas. Switchable 12V DC antenna power is available on the BNC-type connectors for powered antenna accessories. The receiver is half-width for a standard 1U 19” rack-mount and includes rack-mount adapters.

  • Extremely wide 60 MHz UHF tuning bandwidth for maximum versatility in an increasingly congested RF environment; available in four frequency bands: DE2 (470–530 MHz), EE1 (530–590 MHz), EF1 (590-650 MHz) and FG1 (650-700 MHz).
  • True Diversity operation reduces dropouts
  • Frequency scan and IR sync functionality for ease of setup
  • Dual-mode receiver display can switch between standard view or a performance view that highlights key metering
  • Receiver include OLED screens for optimal readout of key settings and alerts
  • Antenna power available for powered antennas and other in-line RF devices
  • Ground-lift switch helps eliminate audible hum caused by ground loops
  • Balanced and unbalanced audio output jacks
Please follow and like us:
More Info

Additional Information

Overall System

————————

Operating Frequencies

Band DE2: 470.125 to 529.975 MHz
Band EE1: 530.000 to 589.975 MHz
Band EF1: 590.000 to 649.975 MHz
Band FG1: 650.000 to 699.875 MHz
Please note that some frequency bands might not be available in your territory or could come with a limited tuning bandwidth / transmitting power due to local regulations.

Minimum Frequency Step

25 kHz

Modulation Mode

FM

Maximum Deviation

ATW-T3201: ±38 kHz (THD:10%)
ATW-T3202: ±36 kHz (THD:10%)

Simultaneous Use

40 Channels per band*
For assistance with multi-band operation or other frequency coordination issues, please contact your regional Audio-Technica customer service representitive. *Region and band dependent

Frequency Response

ATW-T3201: 31 Hz to 15500 Hz
ATW-T3202: 25 Hz to 16700 Hz

Operating Range

100 m

Dynamic Range

ATW-T3201 Mic input: > 115 dB (A-weighted), typical
ATW-T3201 Inst input: > 112dB (A-weighted), typical
ATW-T3202: > 115 dB (A-weighted), typical

Total Harmonic Distortion

<1.0% (at 1 kHz, ±17.5 kHz deviation)

Operating Temperature Range

-5 ºC to +45 ºC

Receiver

—————————–

Receiving System

True Diversity

Sensitivity

20 dBuV at 60 dBA S/N ratio (50Ω termination)

Maximum Output Level

XLR / Balanced: +14 dBV
6.3 mm (¼"") / Unbalanced: +8 dBV

Antenna Input

BNC-type, 50 Ω

Power Output

12 V DC, 160 mA (combined)

Power Supply

100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external po

Dimensions

210.0 mm x 191.0 mm x 43.4 mm (W x D x H)

Weight

1100 g, without accessories

Accessories Included

Two Flexible UHF antennas
AC adapter (country dependent)
Rack Mount Adaptors

Back to top