Navigation
Description

Product Description

The xNode lightweight, half-rack, high-performance IP-Audio interface from Telos Alliance is loaded with advanced features and capabilities. One-button configuration takes a new xNode from out-of-the-box to on-the-air in under one minute. They’re fanless, which means they’re noiseless too. Versatile mounting options let you deploy two xNodes in just 1RU of rack space, or on ceilings, walls, and under counters with an available wall-mount kit. xNodes have studio-grade audio performance specs. Redundant power options (using AC mains and Power-over-Ethernet) and dual-redundant network interfaces are included, both with automatic switching. And xNodes are fully AES67-compliant, so they work with all AES67 audio gear—now, and in the future. In fact, they are the first and only AoIP I/O devices that are Livewire+™, RAVENNA, and AES67 compliant. Every xNode not only supports RAVENNA audio stream interoperability, but also enables advertising/discovery of those streams natively, above and beyond AES67.

xNodes are available in Analog, AES/EBU, Microphone-level, Mixed-Signal, and GPIO versions to handle virtually any signal encountered in today’s broadcast studio.

Please follow and like us:
More Info

Additional Information

Microphone Preamplifiers

Source Impedance: 150 Ohms

Input Impedance: 4 k Ohms minimum, balanced

Nominal Level Range: Adjustable, -75 dBu to -20 dBu

Input Headroom: >20 dB above nominal input

Phantom power: +48VDC, switchable

Analog Line Inputs

Input Impedance: >40 k Ohms, balanced

Nominal Input Range: Selectable, +4 dBu or -10dBv

Input Headroom: 20 dB above nominal inputMeta

Analog Line Outputs

Output Source Impedance: <50 Ohms balanced

Output Load Impedance: 600 Ohms, minimum

Nominal Output Level: +4 dBu

Maximum Output Level: +24 dBu

Digital Audio Inputs And Outputs

Reference Level: +4 dBu (-20 dB FSD)

Impedance: 110 Ohm, balanced

Signal Format: AES3 (AES/EBU)

AES3 Input Compliance: 24-bit with sample rate conversion

AES3 Output Compliance: 24-bit

Digital Reference: Internal (network timebase) or external reference 48 kHz, +/- 2 ppm

Internal Sampling Rate: 48 kHz

Input Sample Rate: 32 kHz to 192 kHz

Output Sample Rate: 44.1 kHz or 48 kHz

A/D Conversions: 24-bit, Delta-Sigma, 256x oversampling

D/A Conversions: 24-bit, Delta-Sigma, 256x oversampling

Frequency Response

Any input to any output: +/- 0.5 dB, 20 Hz to 20 kHz

Latency

Analog Input to Analog Output, 2.75ms including network, converters, and mixing process

Digital Input to Digital Output, 1.75ms including network mixing engine (ASRC off)

Dynamic Range

Analog Inputs to Analog Outputs 108dB referenced to 0dBFs, 111dB A-weighted

Analog Inputs to Digital Outputs 110dB referenced to 0dBFs, 113dB A-weighted

Digital Inputs to Analog Outputs 112dB referenced to 0dBFs, 115dB A-weighted

Digital Inputs to Digital Outputs 126dB

Equivalent Input Noise

Microphone Preamp: -128 dBu, 150 Ohm source, reference -50 dBu input level

Total Harmonic Distortion + Noise

Mic Pre Input to Analog Output: < 0.005%, 1 kHz, -36dBu input, +18dBu output

Analog Input to Analog Output: < 0.005%, 1 kHz, +18dBu input, +18dBu output

Analog Input to Digital Output: < 0.004%, 1 kHz, +18dBu input, -6dBFs output

Digital Input to Analog Output: < 0.004%, 1 kHz, -6dBFs input, +18dBu output

Digital Input to Digital Output: < 0.0003%, 1 kHz, -20dBFs

Crosstalk Isolation, Stereo Separation And CMRR

Analog Line channel to channel isolation: 90dB minimum, 20Hz to 20kHz

Analog Line stereo separation: 85dB minimum, 20Hz to 20kHz

Analog Line Input CMRR: 80dB minimum, 20Hz to 20kHz

Microphone Input CMRR: >60 dB, 20 Hz to 20 kHz

Power Supply AC Input

Auto-ranging supply, 95VAC to 240VAC, 50 Hz to 60 Hz, IEC receptacle, internal fuse

Power consumption: 14 Watts

Operating Temperatures

0 degree C to +40 degree C, <90% humidity, no condensation

Dimensions

8.5” (22 cm) wide; two may be mounted side-by-side in a standard 1RU rack space; 1.72” (4.4 cm)
height, 11.75” (30 cm) depth

Regulatory

Complies with the European Union Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended by Commission Decisions 2005/618/EC, 2005/717/ EC, 2005/747/EC (RoHS Directive), and WEEE.

Back to top