xSwitch is the world’s only zero-configuration Ethernet switch optimized for Livewire® IP-Audio applications. Fast setup requires only IP address assignment via front-panel OLED display or Axia® iProbe software. Features 8 10/100MBit Ethernet ports — 4 with Power-over-Ethernet to power Axia xNodes, Telos® VSet phones, and other networked devices compatible with the IEEE 802.1af PoE standard. Two Gigabit ports are provided for trunking, both with RJ-45 (copper) and SFP (fiber) connections; supports redundant copper/SFP Gigabit connections with auto-switching. Supports 2,000 Multicast groups and 2,000 ARP table entries (8x more than other small-form Ethernet switches). Web-based management interface uses built-in HTTP server. 9.5” x 11” half-rack form factor allows two xSwitches to be racked side-by-side, or placed in a rackmount with Axia xNode IP-Audio interfaces. Noiseless and fan-free; can be conveniently placed adjacent to your audio devices, rack-mounted using included hardware, or wall-mounted (with an accessory kit available separately).
|Power Supply AC Input||
Auto-ranging supply, 95VAC to 240VAC, 1.0 A, 50 Hz to 60 Hz
IEC receptacle, internal fuse
Power consumption: 75 Watts (all PoE ports under load)
|Power over Ethernet||
15.4 W-per-port maximum, 61.6-W switch maximum
Operating temperature: 32° F to 104° F (0°C to 40°C),
Relative humidity: <90% (noncondensing)
8.5” (22 cm) wide; two may be mounted side-by-side in a standard 1RU rack space (with included mounting kit)
1.72” (4.4 cm) height, 11.75” (30 cm) depth
Shipping Weight: 7 lbs. (3.2 kg.)
Shipping Dimensions: 17” (43.2 cm) length, 13” (33 cm) width, 7” (17.8 cm) height
|Ethernet Switch Specifications||
4 QoS levels
VLANs supported: 1
Hardware filter capacity: 8,000 (this is the total limit of MAC addresses + multicast group count supported).
IGMP version 2 snooping
IGMP snooping querier
DSCP (IP Type Of Service based priority)
802.1p (Ethernet 802.1Q tag priority)
HTTP (WEB based management)
Ports 100BT 1, 2, 3, 4: 100BASE-T Fast Ethernet (10/100MBit/s), Power-over-Ethernet source
Ports 100BT 5, 6, 7, 8: 100BASE-T Fast Ethernet (10/100MBit/s)
Ports GIG 1, 2: 100BASE-T Copper or SFP (Small Factor Pluggable Transceiver) module
|IGMP Snooping Parameters||
Router present time out: 400s
Query Response Interval: 10s
The 10/100/1000 Ethernet ports use standard RJ-45 connectors.
|Connecting to 100BASE-T-Compatible Devices||
When connecting the ports to 100BASE-TX-compatible devices, you can use a two or four twisted-pair, Category 5e, straight-through cable.
|Connecting to 1000BASE-T Device||
When connecting the ports to 1000BASE-T devices, you must use a four twisted-pair, Category 6, straight-through cable.
|SFP Module Ports||
The SFP module slot on a dual-purpose port uses SFP modules for fiber-optic and copper uplink ports. xSwitch works with the following supported SFP modules:
Cisco Copper SFP Model:GLC-T=
Cisco Copper SFP Model: SFP-GE-T=
Cisco Multimode fiber model: GLC-SX-MMD=
Cisco Multimode fiber model: GLC-SX-MM-RGD
Complies with the European Union Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended by Commission Decisions 2005/618/EC, 2005/717/ EC, 2005/747/EC (RoHS Directive), and WEEE.