Product Description
Telos® Hx1 one-line and Hx2 two-line POTS telephone hybrids are the most advanced hybrids ever developed for use with analog phone lines. Hx hybrids contain advanced 3rd-generation Telos hybrids for superior audio quality; universal POTS interface features disconnect-signal detection, which works with Telco providers worldwide. Hx hybrids include unique features to make operators’ lives easier, such as Auto-Answer with selectable ring count, a switchable mic/line input, call screening and line- hold features, and front-panel send and receive audio metering. Audio sweetening tools include Telos Digital Dynamic EQ (DDEQ) and adjustable smart leveler, symmetrical wide-range AGC and noise gating by Omnia®, studio adaption and pitch shifter for use in open-speaker applications, and adjustable caller override.
Additional Information
General | Telos 3rd-generation Adaptive Digital Hybrid. Telos Exclusive Feedback Reduction Functions. Send-to-Caller Processing: High-pass Filter, Frequency Shifter, AGC/Limiter, Sample Rate Conversion (with AES option). Receive-From-Caller Processing: High-pass “Hum” Filter, Smart AGC / Platform Leveler, Noise Gate, Telos DDEQ (Digital Dynamic Equalization) 3-band Adaptive Spectral Processor, Sample Rate Conversion (with AES option) |
---|---|
Analog Inputs | Send Analog Inputs: 1 for Hx1, 2 for Hx2 (one per hybrid) Connector : XLR Female, Pin 2 High (Active Balanced with RF Protection) Input Range: Selectable between MIC and LINE levels Line Input Level: Adjustable from -10dBV to +8 dBu (nominal) Analog Clip Point : +21 dBu Impedance: Bridging, > 50 Ohms Analog-to-Digital Converter Resolution: 24 bits |
Analog Outputs | Receive Analog Outputs: 1 for Hx1, 2 for Hx2 (one per hybrid) Connector: XLR Male, Pin 3 High (Active Balanced, RF suppressed Output Level: Nominal +4 dBu, fixed Impedance: < 50 Ohms Digital-to-Analog Converter Resolution: 24 bits Headroom Before Clipping: 20 dB headroom above 4 dBU nominal levels |
AES3 Digital Inputs/Outputs (optional) | Conforms to AES3 standard Sample rates: 32kHz to 48kHz. Rate conversion: Input and output, independently selectable Output Clock: AES input or 48kHz internal. Input Level: Nominal at -20 dBFs. Output Level: Nominal at -20 dBFs |
Audio Performance | Frequency Response: 200 to 3400 Hz, +/- 1 dB THD+N: < 0.5% THD+N using 1 KHz sine wave Dynamic Range: Analog in to Analog out, studio loop mode, 10Hz-20Khz. A-weighted: > 92 dB SNR: Analog output, referred to -12dBm phone line signal (+4dBu studio out), 10Hz-20Khz a-weighted: > 72 dB Trans-Hybrid Loss: Analog phone line with ducking, gate, AGC, EQ all OFF relative to +4dBu input level: >55 dB |
Analog Telephone Line Connectivity | Universal interface for worldwide application. Programmable loop current, ring signaling, and flash time. Includes caller ID decoding using Bellcore 212 modem standard. |
Power Supply | Type: Internal auto-ranging, 90–265 VAC auto-switching, 50–60 Hz. Power consumption: 100 Watts. |